Product Introduction
Port Link/Act/Speed LED (1-28): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
Reset: Press the Reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.
Rear Panel
Power: Connect the supplied AC power cable to this port.
Security Lock: Provide a Kensington-compatible security lock to be able to connect to a secure immovable
device. Insert the lock into the notch and turn the key to secure the lock. The lock-and-cable apparatus
should be purchased separately.
DGS-1210-24P
24-Port 10/100/1000Mbps PoE plus 4 SFP Slot Web Smart Switch.
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-28): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
PoE LED: The PoE LED illuminates green when power is supplied to PoE devices plugged into the ports. It
illuminates amber when an error condition is met and will be off when no power is supplied.
Reset: Press the Reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.
CAUTION: The MiniGBIC ports should use UL recognized Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
Figure 1.6 DGS-1210-24 Rear Panel
Figure 1.7 – DGS-1210-24P Front Panel
CAUTION: The MiniGBIC ports should use UL recognized Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
D-Link Web Smart Switch User Manual
7
7