D-Link DGS-1210-16 Reference Manual page 96

Configuration
3) After the Profile ID has been created, click Continue to go back to the main Access Profile List window.
Click the Edit / New Rules button to enter the Access Rule List window.
Profile ID: Indicates the corresponding access profile Identification number.
Access ID: Indicates the access rule Identification number.
Type: Displays the profile type.
Summary: Displays the access rule summary.
Action: Displays the access rule action.
Click Add to create a new rule. Click Back to go back to the previous page. Click Delete to remove the
corresponding entry.
Click Add to see the following window.
Profile Information: Displays the information about this rule.
Rule Detail: Specifies the detail of the rule.
Access ID – Specifies the Access ID (1-65535).
Figure 4.105 – Confirmation of Creating Access Profile List
NOTE: You cannot select Payload in a MAC ACL,
or L2 Header in IP ACL.
Figure 5.97 – ACL > Access Profile List > Access Rule List
Figure 4.106 – ACL > Access Profile List > Add Access Rule
9 0
9 0
D-Link Web Smart Switch User Manual