Connecting The Router To Your Computer; Rear Panel Connections - D-Link DSL-G604T Quick Installation Manual

Connecting the Router to Your Computer

A. First, connect the power adapter to the power input at the back panel of the DSL-
G604T and then plug the other end of the power adapter to a wall outlet or power strip.
On the front of the device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port on the back panel of
the DSL-G604T and the other end of the cable to an Ethernet Adapter or available
Ethernet port on your computer.
C. Insert the telephone cable included with the Router into the ADSL port, then connect
the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that the connections have
been made.

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter
here to power on the Router. Use the Reset button to restore the settings to the factory
default values in the next chapter for instructions on using the reset button).
ADSL Port
Use the ADSL cable to
connect to the your
telephone line (RJ-11
port).
Reset button
To manually reset,
depress button with the
power on for a few
d
For wireless operation,
mount the antenna on the
threaded antenna post.
Use the Ethernet ports to
connect the Router to
your Ethernet LAN or
Ethernet devices.
Use the adapter shipped
with the Router to connect
to power source.
2
Antenna
Ethernet ports
Power Insert