Replacing The Battery - Palm Treo Treo 680 User Manual

removes all your information, and restores
your formats, preferences, and other
settings to the factory default settings.
Some third-party applications do not
TIP
create a backup on your computer when you
synchronize. If you perform a hard reset, you
may lose data in these applications and you
will need to reinstall the application after the
hard reset. Please contact the application's
developer to find out which data is backed up
during synchronization.
1 Remove the battery from your
smartphone, and then reinsert it.
Don't know how? See Replacing the
battery.
2 When the Palm logo appears, press and
hold Power/End
status bar at the bottom of the screen
fills and disappears, and then release
Power/End
3 When the Erase all data? prompt
appears, press Up
hard reset.
If a Reformatting in
IMPORTANT
progress message appears, do not touch
until the black
.
to confirm the
your smartphone until the process is
complete. This may take up to 10 minutes.
4 When the language selection screen
appears, select the same language you
selected for your desktop software.
Always use the same
IMPORTANT
language for your Treo, your computer
operating system, and your desktop
software. Otherwise, you may lose
information or have difficulty with
synchronization. Support is not provided for
mismatched language setups.
5 (Optional) If you want to confirm that
the hard reset was successful, press
Applications
HotSync . If you see your device
name in the upper-right corner, the hard
reset was not successful.

Replacing the battery

Your Treo 680 comes with a replaceable
battery. Be sure to use a replacement
battery that is recommended or sold by
Palm and is compatible with the Treo 680.
C O M M O N Q U E S T I O N S
and select
11
217