Replacing The Battery - Palm Treo 700P User Manual

11
C O M M O N Q U E S T I O N S
If you do not see the Erase all data?
TIP
message, the hard reset was not performed.
Retry these steps, making sure to hold
Power/End until the logo screen appears.
5 If a language selection screen appears,
select the same language you selected
for your desktop software.
IMPORTANT
language for your Treo smartphone, your
operating system, and your desktop
software. Otherwise, you may lose
information or have difficulty with
synchronization. Support is not provided for
mismatched language setups.
6 Follow the onscreen instructions to
align the screen and set the date and
time.

Replacing the battery

Your Treo 700
replaceable battery. Be sure to use a
replacement battery that is recommended
or sold by Palm and is compatible with the
202
Always use the same
smartphone comes with a
P
Treo 700 smartphone. Failure to use the
P
proper battery may result in a risk of
personal injury or product damage, and it
voids your smartphone warranty.
1 Press Power/End
screen.
2 Press the battery door release, and
slide the battery door downward
to remove it from your smartphone.
3 Place a finger in the notch next to the
battery, and lift up the old battery at a
45-degree angle to remove it from the
compartment.
to turn off the
Battery door
release