Table of Contents
Advertisement
Installation and Operation Manual
• Installation is only to be carried out by competent, qualified and experienced personnel in accordance with the
country of installation’s National Wiring Regulations.
• This equipment contains no user-serviceable parts.
• This unit contains a lithium battery whose expected life is in excess of five years. If the MDAe loses its settings
each time it is switched off then the battery needs replacing. In this instance, return the MDAe to Baxall Limited
and we will replace the battery.
• There is a danger of explosion if the lithium battery is incorrectly replaced. Replace only with the same or an
equivalent type recommended by the manufacturer. Dispose of unused batteries according to the manufacturer’s
instructions.
• The MDAe must not be used in a medical and/or intrinsically safe application.
• Do not exceed the voltage and temperature limits given in the specification. Only operate the MDAe in a clean, dry,
dust-free environment.
Electrical Safety
British Standard BSEN60950:2000 Safety of information technology equipment, including electrical business equipment.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Radio Frequency Emissions
British standard BSEN50081-1:1992 Electromagnetic compatibility - Generic emission standard. Part 1. Residential,
commercial and light industry
British standard BSEN55022:1998 Limits and methods of measurement of radio disturbance characteristics of information
technology equipment.
Immunity
British Standard BSEN 50130-4:1996 Alarm Systems Part 4 Electromagnetic compatibility.
Product family standard: Immunity requirements for components of fire, intruder and social alarm systems.
A “Declaration of Conformity” in accordance with the above EU standards has been made and is on file at Baxall Limited,
Stockport, SK6 2SU, England.
The manufacturer declares that the product supplied with this document is complaint with the provisions of the EMC
Directive 89/336 EEC, the Low Voltage Directive LVD 73/23 EEC, the CE Marking Directive 93/68 EEC and all associated
amendments.
Check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use
the unit and contact the supplier immediately. If the unit must be returned, it must be shipped in the original packaging.
This package should contain:
• MDAe High Capacity Digital Video Storage System
• US and EU Power Cables
• This Installation and Operation Manual
• WaveReader Software and Manual
• IDE Hard Drive Power Connectors x 2 (If shipped without drives installed)
• IDE Hard Drive Connection Ribbon x 4 (If shipped without drives installed)
• Hard Drive Fastening Screws x 24 (If shipped without drives installed)
• SCSI Cable, 50 HD to 50 HD
• IEEE 1394 Firewire Cable
MDAe High Capacity Digital Video Storage System
ELECTROMAGNETIC COMPATIBILITY (EMC)
EU CONFORMANCE STATEMENT
PRODUCT SAFETY
UNPACKING
Page 5
Advertisement
Table of Contents
