Table of Contents
Advertisement
MDAe High Capacity Digital Video Storage System
Installation and Operation Manual
IMPORTANT SAFEGUARDS
This product is exclusively for use in CCTV applications and has no other purpose.
Read and Retain These Instructions - All the safety and operating instructions should be read before the unit is operated
and should be retained for future reference.
Cleaning - Unplug the unit from the supply outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or
aerosol cleaners.
Attachments - Do not use attachments that have not been recommended by the product manufacturer as they may
cause hazards.
Water and Moisture - Do not use this unit near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area that is classified as a wet
location.
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious
injury to a person and serious damage to the unit. Any mounting of the unit should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
Ventilation - Openings in the enclosure are provided for ventilation to ensure reliable operation of the unit and to protect
it from overheating. These openings must not be blocked or covered, and therefore this unit should not be placed in a
built-in installation unless proper ventilation is provided. Do not place directly on other hot equipment, because this may
increase its operating temperature.
Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, and the point where they exit from the
appliance.
Overloading - Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.
Object and Liquid Entry - This equipment must be protected from the ingress of foreign materials. Never push objects of
any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the unit.
Servicing - There are no user-serviceable parts. Do not remove the covers as this may expose you to dangerous voltages
or other hazards. Refer all servicing to qualified service personnel.
Replacement Parts - When replacement parts are required, be sure the service technician has used the replacement
parts specified by the manufacturer. The use of unauthorised substitute components may result in fire, electric shock or
other hazards.
Safety Check - Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks
to determine that the unit is in proper operating condition.
Cable Grounding - If an outside cable system is connected to the unit, be sure the cable system is grounded.
Lightning - For added protection of this unit during a lightning storm, or when it is left unattended and unused for long
periods, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to
lightning and power-line surges.
DAMAGE REQUIRING SERVICE
Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the unit.
• If the unit has been exposed to rain or water.
• If the unit does not operate normally by following the operating instructions.
• If the unit has been dropped or the cabinet has been damaged.
• When the unit exhibits a distinct change in performance.
• If the unit has no power even when the power supply appears to operate correctly. If this is the case then ask a
service engineer to test the internal fuse.
Page 4
Advertisement
Table of Contents
