Palm 650 User Manual page 272

Note:
1.
Press the Battery Door Release button and slide the battery door downward
to remove it from your Treo 650.
2.
While pressing and holding Power/End
press the reset button on the back of your Treo 650.
3.
Continue pressing and holding Power/End
with a progress bar, and then the circular Palm Powered logo appears. When
the circular Palm Powered logo appears, release Power/End
4.
When the "Erase all data?" prompt appears, press Up
hard reset.
Note:
260
Some third-party applications do not create a backup on your computer
when you synchronize. If you perform a hard reset, you may lose data in
these applications and you will need to reinstall these applications after
the hard reset. Please contact the developer to find out which
information is backed up during synchronization.
If you do not see the "Erase all data?" message, the hard reset was not
performed. Please retry the above steps, making sure to hold
Power/End until the circular Palm Powered logo appears.
, use the tip of the stylus to gently
. First the Palm logo appears
to confirm the
.
Section 4A: Help