Palm Treo 700P User Manual page 114

5
Y O U R C O N N E C T I O N S T O T H E W E B A N D W I R E L E S S D E V I C E S
9 Enter the same passkey on your
smartphone and on the Bluetooth
device, and select OK.
IMPORTANT
have a preset passkey; if so, you can find
the passkey in the documentation for that
device. Other devices provide a screen
where you enter a passkey that you make
up. In either case, you must use the same
passkey on both your smartphone and the
other Bluetooth device. We recommend
that where possible, you make up a
passkey of 16 alphanumeric characters
(letters and numerals only) to improve the
security of your smartphone. The longer
the passkey, the more difficult it is for the
passkey to be deciphered.
10 Select Done.
Accepting a connection from another
Bluetooth device
For the smartphone to be visible to
TIP
Bluetooth devices, the Bluetooth setting must
be set to On and visibility must be set to
Visible or Temporary.
108
Some Bluetooth devices
1 Press Applications
Bluetooth .
2 Select Bluetooth On.
3 (Optional) Enter a device name that
identifies your smartphone when it is
discovered by other Bluetooth devices.
Use the same device name for all
NOTE
your Bluetooth connections. If you change
the device name, you need to recreate any
partnerships you already created.
4 Select the Visibility pick list and select
one of the following:
Enables Bluetooth devices that
Visible:
are not on your Trusted Device list to
request a connection with your
smartphone. Your smartphone remains
accessible to other devices until you
and select