Palm Treo 700P User Manual page 176

9
Y O U R A P P L I C A T I O N A N D I N F O M A N A G E M E N T T O O L S
8 After you finish the HotSync Setup,
select Done to return to Applications
View.
You're now ready to sync your smartphone
with your Bluetooth computer.
Synchronizing over a Bluetooth
connection
When you synchronize using your
smartphone's Bluetooth wireless feature,
you don't need your sync cable. This is
especially useful if you travel with a laptop
enabled with Bluetooth wireless
technology.
1 Press Applications
HotSync
2 Select Local.
170
and select
.
3 Select the pick list below the HotSync
icon, and then select the name of the
PC you set up for Bluetooth
synchronization (see Setting up a
Bluetooth connection for
synchronization).
4 Select the HotSync
smartphone.
When synchronization is complete, a
message appears at the top of your
smartphone screen. Be patient;
synchronization may take a few minutes.
Synchronizing over an infrared
connection
BEFORE YOU BEGIN
include the following items:
An enabled IR port and driver or have an
•
IR device attached to it. Check your
computer's documentation to see if it
supports IR communication.
HotSync manager must be active. On a
•
Windows computer, you know HotSync
manager is active when its icon appears
in the lower-right corner of your screen.
When you synchronize using your
smartphone's IR port, you don't need a
icon on your
Your computer must