Xga line transmitter / da; cat5 line driver / da; xga / audio line transmitter; xga / audio line receiver; xga / audio / data line transmitter; xga / audio / data line receiver (33 pages)
Figure 4: Connecting the XGA/Audio Line Transmitter/Receiver System Figure 5: CAT 5 PINOUT Tables Table 1: TP-141 XGA/Audio Line Transmitter Features Table 2: TP-142 XGA/Audio Line Receiver (Topside) Features Table 3: TP-142 XGA/Audio Line Receiver (Underside) Features ...
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
XGA/Audio Line Receiver. 4.1.1 Your TP-141 XGA/Audio Line Transmitter (Topside) The TP-141 is an XGA/stereo audio line transmitter that receives an XGA signal and an unbalanced stereo analog audio signal, codes them, and transmits them over CAT 5 cable to a TP-142 receiver.
4.2.1 Your TP-142 XGA/Audio Line Receiver (Topside) The TP-142 is an XGA/audio line receiver that receives the coded CAT 5 signal transmitted by a TP-141, decodes it and converts it to XGA, stereo analog and S/PDIF digital audio outputs. Figure 2...
Figure 4, do the following: 1. On the TP-141, connect the XGA source (for example, the graphics card of a laptop) to the XGA INPUT 15-pin HD (F) connector. 2. Connect an audio source to the AUDIO IN 3.5mm mini jack, for example,...
Page 10
RJ-45 connector on the TP-142, via CAT 5 (UTP or STP) cabling, (see connector pinouts in section 5.1). 7. Connect the 12V DC power adapter to the power socket of either the TP-141 or the TP-142 and connect the adapter to the mains electricity. The Power Connect feature feeds power to the second device.
Technical Specifications Technical Specifications The technical specifications are shown in Table Table 5: TP-141/TP-142 Technical Specifications TP-141 TP-142 INPUTS: Video: 1 computer graphics video on a 1 RJ-45 LINE IN connector 15-pin HD connector Audio: 1 audio analog 3.5mm mini jack...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.