Controlling Your Projector Using A Wireless Lan Card - NEC iS8-2K Installation And Adjustment Manual

6-3. Controlling Your Projector Using a Wireless LAN Card

When using a wireless LAN to control the projector, please insert a wireless LAN card (available separately)
into the Connection terminal PC Card slot located at the projector side.
NOTE
• Although the built-in Ethernet ports (LAN1/LAN2) cannot be used to control your projector Model iS10 when a wireless
LAN card is set, you can access the T1 circuit through these ports even when a wireless LAN card is set.
• Be sure to set or remove your wireless LAN card only when the power to your projector is off. Insertion or removal of a
wireless LAN card when power to your projector is on may result in a destruction of the wireless LAN card.
32