NEC iS8-2K Installation And Adjustment Manual page 5

Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and
that vents are unobstructed to prevent po-
tentially dangerous concentrations of ozone
and the build-up of heat inside your projec-
tor. Allow at least 8 inches (20cm) of space
between your projector and a wall. Allow at
least 20 inches (50 cm) of space between
the ventilation outlet and object.
2. Prevent foreign objects such as paper clips
and bits of paper from falling into your pro-
jector. Do not attempt to retrieve any objects
that might fall into your projector. Do not in-
sert any metal objects such as a wire or
screwdriver into your projector. If something
should fall into your projector, disconnect it
immediately and have the object removed
by a qualified service person.
3. Do not place any liquids on top of your pro-
jector. Refer servicing to qualified service
personnel if liquid has been spilled.
4. Keep any items such as magnifying glass
out of the light path of the projector. The light
being projected from the lens is extensive,
therefore any kind of abnormal objects that
can redirect light coming out of the lens, can
cause unpredictable outcome such as fire
or injury to the eyes.
5. Do not cover the lens with the supplied lens
cap or equivalent while the projector is on.
Doing so can lead to melting of the cap and
possibly burning your hands due to the heat
emitted from the light output.
6. When using a LAN cable:
Do not connect any network that could be
subjected to overvoltage to the LAN port of
your projector. It may cause electric shock.
CAUTION: High Pressure Lamp May Explode
if Improperly Handled. Refer Servicing to Quali-
fied Service Personnel.
Lamp Caution: Please read before
operation
Due to the lamp being sealed in a pressurized
environment, there is a small risk of explosion,
if not operated correctly. There is minimal risk
involved, if the unit is in proper working order,
but if damaged or operated beyond the recom-
mended 750 hours for iS10 or 1500 hours for
iS8-2K, the risk of explosion increases.
Please note that there is a warning system built
in, that displays following message when you
reach 750 hours (shortest life) for iS10 or 1500
hours (shortest life) of operation "Lamp Warn-
ing". When you see this message please con-
tact your dealer for a replacement. If the lamp
does explode, smoke will be discharged from
the vents located on the back of the unit. This
smoke is comprised of glass in particulate form
and Xenon gas, and will not cause harm if kept
out of your eyes. If your eyes
have been exposed to this gas, please flush your
eyes out with water immediately and seek im-
mediate medical attention. Do not rub your eyes!
This could cause serious injury.
WARNING: Do not look into the lens while the
projector is on. Serious damage to your eyes
could result.
CAUTION
Do not unplug the power cable from the wall
outlet under any one of the following circum-
stances. Doing so can cause damage to the
projector:
• Immediately after the cooling fan(s) stops
working (After the projector is turned off with
the POWER OFF button the cooling fan(s)
continues to work for 3 minutes while the
POWER indicator is blinking Orange).
5