Color Adjust - NEC iS8-2K Installation And Adjustment Manual

Shutter Mode
On -------------- The lens shutter function will be activated during the switching of signals.
Off -------------- The lens shutter function will be not activated during the switching of signals.
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
Enable --------- Enable a lock on the control buttons on your projector.
Disable -------- Disable the lock on the control buttons.
Lens Memory
Controls the lens memory function.
Enable --------- Enables the lens memory function.
Disable -------- Disables the lens memory function.
With Focus --- Check this to store the focus as well.
Apply ---------- Puts the changed settings into effect.
Turret Control
Controls the turret on which the anamorphic lens is mounted.
Auto ----------------- The anamorphic lens selected at Title switches automatically when the title is switched.
Manual ------------- No anamorphic lens control is performed.
Reference Select - Used to select the anamorphic lens type.
DVI Port
Makes the DVI port's EDID setting.
Check the box to enable the EDID.
Date/Time
To set the projector's date and time to the same date and time as the computer is set to, click the box to the
left or "Set from PC Date/Time" to check it.
If you do not wish to use the computer's date and time, set the desired date at "Date", the desired time at
"Time".

11-2-2. Color Adjust

Measured Color/[MCGD]
Create MCGD File Start -- Start creating the MCGD data.
Save ------------------------- Save the created MCGD data.
File Select ------------------ Select the MCGD file.
Select Filename ----------- Use to check the created MCGD data.
Target Color/[TCGD]
Used for factory settings.
TEST Pattern Setting
Sets the test pattern color data.
MCGD --------- Select the MCGD file.
TCGD ---------- Select the TCGD file.
65