NEC iS8-2K Installation And Adjustment Manual page 55

6. Enter information on the pixel you need.
Normally leave this field as is with the default value.
Assign X and Y values of the display area.
X : 0 - 2047
Y : 0 - 1079
This sets the horizontal display area to be used when the primary
lens zooming feature does not meet the required projection in a
fixed wide-screen format on the DLP Cinema Projector Model iS8-
2K.
VISTA Screen
Call the DC2K VISTA AREA.SCREEN file.
HDTV Screen
Call the DC2K HDTV AREA.SCREEN file.
7. [Letterbox] should normally be checked.
8. The [Cropping] setting is used when the projected
image sticks out from the screen.
Upper Left : Sets the amount of cropping at the upper left of the screen. (This becomes the reference point of
Left Curve : Sets the amount of curvature of the left vertical line of the screen.
Lower Left : Sets the amount of cropping at the lower left of the screen.
Top Curve : Sets the amount of curvature of the top horizontal line of the screen.
Bottom Curve : Sets the amount of curvature of the bottom horizontal line of the screen.
Upper Right : Sets the amount of cropping at the upper right of the screen.
Right Curve : Sets the amount of curvature of the right vertical line of the screen.
Lower Right : Sets the amount of cropping at the lower right of the screen.
9. Click [Save], enter the file name that is to be saved,
and click [OK].
the XY coordinates.)
Enter the value of the relative value from the x coordinates of Upper Left and Lower Left. Setting this
value to a negative value permits the correction of the distortion of the anamorphic lens.
Enter the value of the relative value from the y coordinates of Upper Left and Upper Right. Setting
this value to a negative value permits the correction of the distortion of the anamorphic lens.
Enter the value of the relative value from the y coordinates of Lower Left and Lower Right. Setting
this value to a positive value permits the correction of the distortion of the anamorphic lens.
Enter the value of the relative value from the x coordinates of Upper Right and Lower Right. Setting
this value to a positive value permits the correction of the distortion of the anamorphic lens.
55