Chapter 2. Installing and Set Up
USB Connector
Paper Setting Lamp
Open Guide Unit
Open Guide Lever
Printer Status Lamps Name and Printer Status
Printer status lamp display ●:on, ○:off, *:flashing
LED Display
POWER
MEDIA
○
○
*
○
●
○
●
○
●
○
*
●
●
●
*
●
To be used to connect the USB cable.
When setting the paper, insert the paper
until the lamp is lit. When the lamp
blinks, remove the paper until the lamp
goes off.
Open the drawer unit when replacing
paper, or when performing maintenance.
When open the open guide unit, hold
this lever.
ERROR
○
The power of printer is off.
The printer is initializing after turn on the
○
power
Thermal head is cooled/heated on printing.
The printer is ready
If you leave the printer of ready state for 5
○
minutes, the printer goes into standby
mode automatically.
*
The drawer unit is opened.
Paper jam occurred.
●
The printer mechanical section is faulty.
Trouble of printer control board.
●
The ink ribbon loaded is not supported.
The paper is not set.
Out of the paper.
●
The ink ribbon is not loaded.
The ink ribbon is empty.
The printer is loading the paper or the ink
○
ribbon.
7
Description