Troubleshooting - Hotpoint Ariston Top Blender Steam Operating Instructions Manual

en
2. Run a 20 minutes cycle of steam cooking wi-
thout any food into the jar.

TROUBLESHOOTING

The product is designed in order to give the user a clear feedback about any problem or usage mistake.
Please refer to this table to discover the meaning of error messages on the display.
Error description
The glass jar is incorrectly
assembled on the blade
unit.
The power is off.
Water amount into the tank
is lower than minimum
quantity.
The water tank is not in wor-
king position.
The valve is
clogged.
In case of E1 message, please disconnect and reconnect the power cord. If the problem
persists, please call the service.
18
3.
Error Solutions
message
E1
Check that the jar is correctly assembled; it must
be screwed till lock position; the jar handle must
be on the right, aligned over the water tank
E1
Reactivate power; push on/off button to get the
product start working. Set time for steam cooking
and press start. When blending, come back to off
position and then re-set desired speed.
E2
Add water into the tank.
E2
Control that water tank is in position.
E1
Follow descaling procedure described below;
control that no piece of food is completely clogging
the steam flow.
Rinse the water circuit with another 20 minu-
tes cycle by using 500ml of pure water.