Changing Ringtones - Siemens Gigaset S430 User Manual

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can select any sound from the
Sound Manager (page 36).
You can configure the following functions
with different ringtones:
u
Ext. Calls: For external calls
u
Internal Calls: For internal calls
u
Appointments: For set appointments
(page 37)
u
Alarm: For a pre-set wake-up call
(page 37)
u
All: The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of ringing. For external calls, you
can choose to have the name of the caller
announced. This requires the correspond-
ing voice pattern to be recorded before-
hand (page 17).
¢ ¢
v ï
Ringer Settings
q
Select setting, e.g.
and press
r
Set volume (1–6).
s
Jump to the next line.
r
Select melody.
r
Activate or deactivate
Announce. Requirement: Call-
ing Line Identification
¤
Save changes (page 11).
In idle status, you can also open the menu
by pressing t briefly.
Ringer Settings
Ext. Calls,
.
§OK§
Same settings for all functions
¢ ¢
v ï
Ringer Settings
¤
Set volume and ringtone (see "Settings
for individual functions").
Press the display key to con-
§Yes§
firm the prompt.
a
Press and hold (idle status).
Activating/deactivating the ringtone
You can deactivate the ringer on your
handset before you answer a call or when
the handset is in idle status; the ringer can
be deactivated permanently or just for the
current call. The ringtone cannot be re-
activated while an external call is in
progress.
Deactivating the ringtone permanently
*
Press the star key and hold
until you can no longer hear
the ringtone.
The Ú icon appears in the display.
Re-activating the ringtone
*
Press and hold the star key.
Deactivating the ringtone for the current
call
Press the display key.
§Silence§
Activating/deactivating the alert tone
Instead of a ringtone, you can activate an
alert tone. When you get a call, you will
hear a short tone ("Beep") instead of the
ringtone.
*
Press and hold the star key
and within 3 seconds:
Press the display key. A call is
§Beep on§
now signalled by one brief
alert tone. You will now see
º in the display.
Handset settings
¢
All
35