Siemens Gigaset S430 User Manual page 23

Using the directory and lists
Setting message key to flashing
Requirement: There is at least one new
entry remaining in one of the lists.
f
Open calls list.
Set Message LED
Select and press
a
Press and hold (idle status).
Key f disappears on opening a list and
exiting the menu.
Calls list
Requirement: Calling Line Identification
(CLIP, page 12)
The numbers of the last 30 incoming calls
are stored. Depending on the
set, or just
Type All Calls
stored.
Multiple calls from the same number are
stored as follows:
u
All Calls stored several times.
u
Missed Calls stored once (last call).
The calls list is displayed as follows:
Calls List: 01+02
Number of new entries + number of old, read
entries
Setting list type for calls list
¢
f
Calls List: 01+02
List Type
/
Missed Calls All Calls
Select and
a
Press and hold (idle status).
The entries in the calls list are retained
when you change the list type.
20
.
§OK§
Calls List
are
Missed Calls
¢ ¢
v
Calls
press (‰ = on).
§OK§
Opening calls list
f
Press.
Calls List: 01+02
Select as required and
press.
q
Select entry.
The calls list displays the last incoming
call.
List entry
Example of a list entry:
Missed Calls
New Call 01/ 02
1234567890
28.09.04 09:45
§Delete§ §§Call§§§
u
List type (in header)
u
Status of entry
Call: new missed call
New
Old Call: previously read entry
Answ.: call was accepted (only on list
type
All Calls)
u
Entry number
01/02 means, for example, first entry
of two entries in total
u
Number or name of caller
You can add the number of the caller to
the directory (page 17).
u
Date and time of call (if set, page 8)
You have the following options:
u
Call back the caller (if the number of
the caller was transmitted, page 12)
Press the display key
begins at once. The number is entered
in the last number redial list.
u
Delete entry
Press the display key
§OK§
. Callback
§Call§
.
§Delete§