AJA kona lhi Installation And Operation Manual page 45

Hide thumbs Also See for kona lhi:

Table of Contents

HDMI Tab Screen

KONA LHi Installation and Operation Manual — Using The KONA LHi Control

The KONA LHi's HDMI input and output are shown and conﬁgured at this tab screen. The HDMI

input pane shows if an HDMI input source has been detected and locked on, showing the

format found.

KONA LHi Control Panel, HDMI Tab

HDMI Tab Screen Settings

HDMI Output—one pulldown allows you to select either the primary video format

(framebuffer) or a secondary one (up/down/cross-conversion). Pulldowns are provided for

configuring the video output range, color space and number of embedded audio channels

(2 or 8) for the HDMI output. A Protocol pulldown allows you to choose either "HDMI" or

"DVI" protocol—use DVI if you're outputting to a DVI monitor using an HDMI to DVI

adapter.

HDMI Input—while there are two different ranges of colorspace values that SDI can use (RGB

and YCbCr) the HDMI input on the KONA LHi will automatically negotiate between the two.

A pulldown allows you to select the video input RGB range (SMPTE or Full).

Table of Contents