AJA kona lhi Installation And Operation Manual page 50

Hide thumbs Also See for kona lhi:

Table of Contents

Gamma—choose from the following:

Linear (1.8)

Rec 601 (2.20)

Rec 709 (2.22)

Auto

Enable Custom LUTs—this checkbox enables a custom color lookup table (LUT) for use

in Final Cut Pro. When checked, there will be a new "Custom LUT" menu item under the

Windows menu in Final Cut. Selecting that item brings up the KONA LHi Control Panel

"Custom LUTs" dialog shown below. Defining a LUT applies it to the KONA LHi output.

The custom LUT will be saved with the Final Cut Pro presets.

Note: Custom LUTs only work with RGB material.

KONA Custom LUTs Dialog

Select a "canned" LUT or

create your own

Click to restore factory defaults

Adjust Gain & Offset sliders to

change color. Changed values

will appear in red in text fields.

You can also enter specific

numbers to explicitly set a value.

Table of Contents