Package Contents; Before Getting Started; Find The Strongest Signal - weBoost smartech III 472005 Installation Instructions Manual

Connect 3g adjustable gain in-building wireless 800/1900 mh
Table of Contents

Advertisement

Package Contents

Connect 3G
(Not included with some models)
Wall Mount Bracket
Tools Required for Installation:
(depending on your particular installation, you will need the following tools)
1. Pole mount - 10 mm open-end wrench or adjustable wrench
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver

Before Getting Started

Before you install your Connect 3G and
start enjoying improved cellular reception in
your facility, please do the following:
Read through all the installation steps.
This will help you know what to expect
from start to finish.
Familiarize yourself with all materials
in your product package. This will
allow you to know which pieces are
referenced in the instructions.
Identify the location of your best
available cellular signal. See
instructions that follow.
Determine the best installation
locations for your Outside Antenna,
Signal Boost, and Inside Antenna.
Test the function of your Connect 3G
system before finalizing installation.
AC Power Supply
6V / 2 5A
(859912)
Omni Antenna Mount Bracket
Outside Antenna Kit
20' RG6 coax cable
(311201-0620)
Find the Strongest Cellular Signal
Before you install your Connect 3G signal
booster, you must determine the location of
the best available cellular signal. This will
affect the location of your Outside Antenna
and will help you get the best performance
from your Connect 3G. You can find the
strongest signal outside your building,
typically at the highest point available, using
any of the following methods:
1.
Best method:
Connect the Outside Antenna to the
Connect 3G signal booster, and the
Connect 3G to the Inside Antenna.
Have one person outside (on the roof for
best results) move the Outside Antenna
with a second person inside the building
near the Inside Antenna watching the
signal strength on a phone. This allows
you to read the signal strength from
nearby cell towers.
a. The person inside should have the
phone in test mode so the numerical
signal strength can be read. This
is more accurate than the bar
indicator.
Panel Antenna Kit
Inside Panel Antenna
30' RG6 coax cable
(311155-0630)
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

472005

Table of Contents