Camera (Optional); Removing The Camera; Replacing The Camera - Dell Inspiron Mini 9 910 Service Manual

Back to Contents Page
Camera (Optional)
Dell™ Inspiron™ 910 Service Manual
Removing the Camera
Replacing the Camera
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Removing the Camera
1. Follow the instructions in Before You
2. Remove the module cover (see
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the display assembly (see
6. Remove the display bezel (see
1 camera 2 camera cable connector
7. Disconnect the camera cable from the connector.
8. Remove the camera board.
Replacing the Camera
1. Align the camera board over the slot holes and gently replace it.
2. Reconnect the camera cable to the connector.
3. Replace the display bezel (see
4. Replace the display assembly (see
5. Replace the palm rest (see
6. Replace the keyboard (see
7. Replace the module cover (see
8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Begin.
Removing the Module Cover).
Removing the Keyboard).
Removing the Palm Rest).
Display Assembly).
Display Bezel).
Replacing the Display Bezel).
Replacing the Display Assembly).
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Module Cover).