Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Inspiron Mini 9 910 Service Manual

Back to Contents Page
Coin-Cell Battery
Dell™ Inspiron™ 910 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Coin-Cell Battery
1. Follow the instructions in Before You
2. Remove the module cover (see
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the display assembly (see
6. Remove the system board (see
7. Turn the system board over.
1 coin-cell battery 2 coin-cell battery cable connector
8. Disconnect the coin-cell battery cable from the system board connector.
9. Remove the coin-cell battery.
Replacing the Coin-Cell Battery
1. Replace the coin-cell battery.
2. Connect the coin-cell battery cable to the system board connector and hold the coin-cell battery in place.
3. Replace the system board (see
4. Replace the display assembly (see
5. Replace the palm rest (see
6. Replace the keyboard (see
7. Replace the module cover (see
Begin.
Removing the Module Cover).
Removing the Keyboard).
Removing the Palm Rest).
Display Assembly).
Removing the System Board).
Replacing the System Board).
Replacing the Display Assembly).
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Module Cover).