Table of Contents
Advertisement
Back to Contents Page
Camera (Optional)
Dell Studio™ 1557/1558 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
inside the computer.
Removing the Camera Module
1. Follow the instructions in
Before You
2. Remove the display panel (see
3. Remove the two screws that secure the camera to the display cover.
4. Lift the camera module from the display cover.
1
screws (2)
Replacing the Camera Module
1. Follow the instructions in
Before You
2. Replace the two screws that secure the camera module to the display cover.
3. Replace the display panel (see
Back to Contents Page
Begin.
Removing the Display
Panel).
Begin.
Replacing the Display
Panel).
Before Working Inside Your
Computer) before working
Advertisement
Table of Contents
