Front Wheel - Yamaha YBR125ED Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
6
the bulb) by pushing it in.
6. Install the headlight unit.

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Remove the rubber cap, and then
loosen the wheel axle nut.
1. Rubber cap
2. Axle nut
3. Washer
2. Place the motorcycle on the cen-
terstand.
6-33
3. Disconnect the speedometer ca-
EAU24361
ble from the front wheel.
EAU56302
EWA10822
1. Speedometer cable
4. Remove the wheel axle nut and
the washer.
5. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut.
[ECA11073]