Front Wheel - Yamaha YZ65P Owner's Manual

Periodic maintenance and adjustment

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut.
1
1. Washer
2. Axle nut
2. Place the motorcycle on a suitable
stand. (See page 7-27.)
3. Remove the axle nut and washer.
4. Pull out the wheel axle.
1. Wheel axle
5. Remove the wheel. NOTICE: Do
EAU24361
EAU56372
To install the front wheel
EWA10822
1. Make sure the brake pads have
2. Lift up the wheel between the fork
3. Insert the wheel axle from the right
4. Install the washer and axle nut.
5. Tighten the axle nut to the speci-
2
Tightening torque:
1
7-28
not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut.
not been forced shut.
legs.
side.
fied torque.
Axle nut:
70 N·m (7.0 kgf·m, 52 lb·ft)
[ECA11073]
7