Cast Wheels; Adjusting The Clutch Lever Free Play - Yamaha YBR125ED Owner's Manual

Hide thumbs Also See for YBR125ED:
Table of Contents

Advertisement

Cast wheels

To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
 The
wheel
rims
checked for cracks, bends, warp-
age or other damage before each
ride. If any damage is found, have
a Yamaha dealer replace the
wheel. Do not attempt even the
smallest repair to the wheel. A de-
formed or cracked wheel must be
replaced.
 The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU21963
Adjusting the clutch lever free
play
4
should
be
1. Rubber cover
2. Locknut
3. Clutch lever free play adjusting bolt
4. Clutch lever free play
The clutch lever free play should mea-
sure 10.0–15.0 mm (0.39–0.59 in) as
shown. Periodically check the clutch
lever free play and, if necessary, adjust
it as follows.
1. Slide the rubber cover back at the
clutch lever.
2. Loosen the locknut.
3. To increase the clutch lever free
play, turn the clutch lever free play
adjusting bolt in direction (a). To
EAUP0131
1
2 3
TIP
If the specified clutch lever free play
could be obtained as described above,
skip steps 4–7.
4. Fully turn the adjusting bolt at the
5. Loosen the clutch cable locknut,
1. Locknut
2. Clutch lever free play adjusting nut
6. To increase the clutch lever free
6-16
decrease the clutch lever free
play, turn the adjusting bolt in di-
rection (b).
clutch lever in direction (a) to loos-
en the clutch cable.
located towards the center of the
cable.
play, turn the clutch lever free play
adjusting nut in direction (a). To
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents