Front Wheel - Yamaha PW50 2020 Owner's Manual

Periodic maintenance and adjustment

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Disconnect the brake cable at the
wheel hub by removing the front
brake lever free play adjusting nut,
then removing the cable from the
brake camshaft lever and brake
shoe plate.
2
1
1. Brake camshaft lever
2. Brake shoe plate
3. Washer
4. Axle nut
5. Brake cable
6. Front brake lever free play adjusting nut
3. Remove the axle nut and washer.
4. Pull the wheel axle out, and then
remove the wheel.
EAU24361
EAU56510
EWA10822
3
4
5
6
1
1. Wheel axle
To install the front wheel
1. Install the brake shoe plate into
the wheel hub as shown.
2. Lift the wheel up between the fork
legs.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.
1. Retainer
7-23
1
7