Yamaha YBR125ED Owner's Manual page 67

1. Wheel axle
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the pro-
jections mesh with the slots.
1. Speedometer gear unit
2. Lift the wheel up between the fork
legs.
PERIODIC MAINTENANCE AND ADJUSTMENT
TIP
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the slot in
the speedometer gear unit fits over the
retainer on the fork leg.
1
1. Speedometer gear unit retainer
3. Insert the wheel axle, and then in-
stall the washer and axle nut.
4. Take the motorcycle off the cen-
terstand so that the front wheel is
on the ground, and then put the
sidestand down.
5. Tighten the axle nut to the speci-
fied torque, and then install the
rubber cap so that it fits over the
washer.
6-34
Tightening torque:
Axle nut:
59 Nm (5.9 m·kgf, 43 ft·lbf)
6. While applying the front brake,
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
7. Connect the speedometer cable.
6