PERIODIC MAINTENANCE AND ADJUSTMENT
Rear wheel
To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut and the brake
6
torque rod nut at the brake shoe
plate.
2. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the brake torque rod cot-
ter pin, the nut, and the bolt.
EAU25081
EAU56650
EWA10822
1. Axle nut
2. Brake torque rod
3. Brake torque rod nut and bolt
4. Brake torque rod cotter pin
3. Place the motorcycle on the cen-
terstand.
4. Remove the brake pedal free play
adjusting nut, and then discon-
nect the brake rod from the brake
camshaft lever.
1
4
3
2
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
5. Loosen the drive chain puller lock-
1. Wheel axle
2. Drive chain puller locknut
3. Drive chain slack adjusting bolt
6-35
3
1
2
nut and the drive chain slack ad-
justing bolt on both ends of the
swingarm.