Preparing the Printer
Installing the 550-Sheet Optional Drawer
Installing an Optional Memory Card
Installing the 550-Sheet Optional Drawer
Your printer supports one optional drawer that lets you load up to 550 sheets of paper.
CAUTION:
If you are installing a 550-sheet drawer after setting up the printer, turn the
printer off, and unplug the power cord before continuing.
1.
Unpack the 550-sheet drawer, and remove any packing material.
2.
Place the drawer in the location you have chosen for your printer.
NOTE:
If you have optional memory to install, leave clearance on the right side of the printer.
3.
Align the holes in the printer with the positioning posts on the 550-sheet drawer, and lower the printer
into place.
Specifying the media type and size loaded into each tray will help prevent jams. See
Configuring the Paper