Select Manual paper from the Paper tray drop-down list.
Select the appropriate Paper size and type.
Click OK on the Print window to send the job to print.
The printer displays the Load Manual Feeder light sequence.
Place a sheet of the selected print media, print side facing up, at the center of the manual feeder, but
only to the point where its leading edge can contact the paper guides.
Hold transparencies by the edges and avoid touching the print side. Oil from your fingers can
affect print quality.
Insert envelopes with the flap side face down and with the stamp area as shown.
Load letterhead face up, with the top of the sheet first.
If you experience problems with paper feed, turn the paper over.
Adjust the paper guides to the print media's width.
Hold both sides of the print media close to the manual feeder, and push it into the printer until it
There is a brief pause between the time the printer engages the print media and when it feeds into the
Do not force the print media into the feeder. Forcing the media causes jams.
Printing on Both Sides of the Paper (Manual Duplex)