Physical; Power Requirements; Environmental; Interfaces - Globalstar FAU200 SAT Installation Handbook

Physical

Colour
Dimensions
Weight
Degree of ingress protection EN 60529 IP55.

Power requirements

Supply voltage
Supply ripple
Input current
Power consumption

Environmental

Storage temperature
Transportation temperature -30 to +70° C.
Operating temperature
Relative humidity
Altitude

Interfaces

Telephone port
Data port
PDI port

Air interface

Standards
Transmit frequency
Receive frequency
Transmit power
Receiver G/T ratio
Including antennas
Excluding antennas
FAU Installation Handbook
Light grey.
W 300 x D 175 x H 525 mm.
W 300 x D 175 x H 300 mm.
7.3 kg.
+48 V DC nominal, +44 to +54 V DC.
200 mVrms maximum.
1.0 A maximum.
50 W maximum.
-30 to +70° C.
-30 to +60° C with 1120W/m
Up to 90%.
Sea level to 5000 m.
Analogue subscriber line.
UK standard, 600 ohms (resistive).
(other country standards are available).
DTMF ITU-T Q.23.
Supports terminal equipment up to REN=3.
Loop calling unguarded clearing.
Line reversal.
Clear backward.
Not currently supported.
RS422 levels.
Connector for configuration and commissioning tool
RS232 levels.
Globalstar Air Interface (GAI).
1610.0 to 1626.5MHz.
2483.5 to 2500.0MHz.
+37dBm EIRP maximum.
-24.4 dB/K minimum -80 to +80 degrees.
-23.5 dB/K minimum -75 to +75 degrees.
2
solar radiation.
19