Globalstar FAU200 SAT Installation Handbook page 14

FAU Installation Handbook
• Insert the SIM into the holder as follows. Click the holder up in the direction of
• Attach the FAU Dongle and Dongle lead to a PC running the FAU200
• As required, record the FAU and subscriber details, e.g. application, software
• Disconnect cables, fit the dust cap on the PDI connector, fit the rear cover and
• Re-pack the FAU.
8
the arrow, swing open, insert the SIM into the slot notch up as shown, fold back
down and click closed.
Installation and Configuration Software (WM2). If required, use WM2 to
download application-specific software and software configurable parameters
(including the SIM PIN) to the FAU. For further information, see the WM2
Getting Started manual.
version, telephone number, SIM number, SIM PIN, FAU serial number, IMEI
number.
tighten the securing screws to 2.5 Nm torque.
SIM Card Holder