Fitting The Fau - Globalstar FAU200 SAT Installation Handbook

FAU Installation Handbook

Fitting the FAU

The installer will first need to decide the appropriate method for installing the FAU,
see Pre-Installation.
1. Where conditions allow, mount the FAU on a pre-installed stub pole or mast, by
10
using the handle provided on the FAU. Typically, these situations will arise only
where the top of the pole can be reached safely and easily. Connection of cables
will then be possible after the FAU has been secured in position.
Fitting the Antenna
WARNING:
DANGER TO PERSONNEL
Do not install the FAU during a
lightning storm.
WARNING:
HAZARDOUS VOLTAGES
Use caution when installing or
modifying telephone lines as
hazardous voltages may be present.