Installation; Assembling The Fau - Globalstar FAU200 SAT Installation Handbook

Installation

Check the unit for transit damage and verify that the rear cover is secure. Cross check
that the FAU identity number (IMEI number) on the base of the unit, is the one
allocated to the subscriber.

Assembling the FAU

Sun shields and antennas must be fitted to the FAU housing before fitting the unit to
a pole.
NOTE: Both front and rear sun shields must always be fitted.
1. Place the front sun shield in position on housing ensuring it locates correctly
2. Position the rear sun shields and insert four screws through rear sun shield and
3. Tighten screws in turn to 0.8-1.0 Nm torque. Do not overtighten these screws or
4. Insert sealing 'O' rings into antenna sockets of main housing.
5. Place both antennas in position; they are keyed to ensure correct location of each
6. Secure the antennas using the captive screws and tighten to 0.8-1.0 Nm torque.
with screw holes.
housing into front sun shield.
the sun shields could be damaged.
antenna and mating of antenna connectors.
FAU Installation Handbook
FAU Label
Fitting Sun Shields
9