Safety Instructions For Installation - Miele DGD 4635 Operating And Installation Instructions

Pressure steam oven
Table of Contents

Advertisement

 Incorrect installation can result in personal injury and damage
to property.
Before connecting the appliance to the mains supply and after
any work on it, please flush the appliance pipework through to re‐
move any deposits from the pipework and the tap.
This steam oven must only be installed in a tall unit.
It must be installed at such a height that small children cannot
reach the appliance door which gets hot during use.
To prevent the risk of scalding on hot food and steam when load‐
ing and unloading dishes the appliance should be installed at an er‐
gonomically suitable height. The middle of the appliance must not
be above eye level. The distance from the floor to the bottom of the
appliance must not exceed 1400 mm (see "Installation notes - Instal‐
lation height").
This appliance must not be installed and operated in mobile in‐
stallations (e.g. on a ship).
All installation work must be carried out by a suitably qualified
person in strict accordance with current local and national safety
regulations.
The appliance must be connected to the electrical supply and
plumbed in by a suitably qualified and competent person in strict ac‐
cordance with current national and local safety regulations.
The tap for the water inlet hose must be easily accessible after
the appliance has been installed.
The drainage siphon must not be located higher than the drain
hose connection point on the appliance. This is to ensure that water
can drain out completely after a programme. Drainage water is ap‐
prox. 80–90 °C.

Safety instructions for installation

89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgd 6605Dgd 6635

Table of Contents