Miele DGD 4635 Operating And Installation Instructions page 9

Pressure steam oven
Table of Contents

Advertisement

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the appli‐
ance when Miele replacement parts are used.
If the connection cable is damaged, it must be replaced with a
special connection cable type H 05 VV-F (PVC insulated). See "Elec‐
trical connection".
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– it is switched off at the mains circuit breaker, or
– it is switched off at the wall socket and the plug is withdrawn
from the socket. Do not pull the mains connection cable but the
mains plug to disconnect your appliance from the mains electrici‐
ty supply.
This steam oven must be plumbed in by a suitably qualified per‐
son.
Miele cannot be held liable for damage caused by incorrect installa‐
tion or connection.
The appliance must be connected to the cold water supply only.
The tap must be easily accessible after the appliance has been in‐
stalled.
Before connection, check the inlet and drain hoses for visible
signs of damage.
The built-in water protection system will only protect the appli‐
ance from water damage if the following conditions have been met:
– The inlet and drain hoses are correctly fitted and connected.
– The steam oven is properly maintained and parts are replaced
where it can be seen that this is necessary.
Warning and Safety instructions
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgd 6605Dgd 6635

Table of Contents