Symbol MC9000-G Product Reference Manual page 179

10. Tap the IP Config tab.
Figure 4-22. Mobile Companion - IP Config Tab (DHCP)
11. Select either DHCP or Static from the IP Type drop-down list.
12. If you select Static IP, enter the required data in the fields that appear in the window. See
your network administrator for this information.
13. Tap ok.
14. Tap ok.
15. The Mobile Companion wireless status icon should indicate that the terminal is connected
to the AP. If the status icon does not indicate that the terminal is connected to the AP, see
your network administrator.
16. Tap Start - Settings - Connections tab - Connections icon - Advanced tab.
Figure 4-23. Connections Window - Advanced Tab
4-23
Communications