Operational Modes; Scanning Considerations - Symbol MC9000-G Product Reference Manual

Operational Modes

Mobile computers with an integrated imager have two modes of operation: Decode Mode and Image
Capture Mode. Both modes are activated by pulling the trigger.
Decode Mode
In this mode, upon pulling the trigger, the Imager attempts to locate and decode enabled bar codes
within its field of view. The Imager remains in this mode as long as the trigger is pulled, or until a bar
code is decoded.
Image Capture Mode
In this default mode, upon pulling the trigger, the Imager attempts to locate and decode enabled bar
codes within its field of view. The Imager remains in this mode as long as the trigger is pulled, or until
a bar code is decoded.

Scanning Considerations

Typically, scanning is a simple matter of aim, scan/decode and a few quick trial efforts master it.
However, two important considerations can be used to optimize any scanning performance:
• Range
Any scanning device decodes well over a particular working range — minimum and
maximum distances from the bar code. This range varies according to bar code density and
scanning device optics.
Scanning within range brings quick and constant decodes; scanning too close or too far
away prevents decodes. Move the scanner closer and further away to find the right working
range for the bar codes being scanned. However, the situation is complicated by the
availability of various integrated scanning modules. The best way to specify the appropriate
working range per bar code density is through a chart called a decode zone for each scan
module. A decode zone simply plots working range as a function of minimum element widths
of bar code symbols.
• Angle
Scanning angle is important for promoting quick decodes. When laser beams reflect directly
back into the scanner from the bar code, this specular reflection can "blind" the scanner.
To avoid this, scan the bar code so that the beam does not bounce directly back. But don't
scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan
to make a successful decode. Practice quickly shows what tolerances to work within.
2-47
Operating