Multi Media Card (Mmc) / Secure Device (Sd) Card - Symbol MC9000-G Product Reference Manual

Multi Media Card (MMC) / Secure Device (SD) Card

The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see
8-1).
SD cards are inter-operable with MMC cards and can also be used in MC9000
mobile computers.
Note
Do not remove the keypad while the mobile computer is on and do not operate
the mobile computer with the keypad detached. Follow proper ESD precautions
to avoid damaging the MMC/SD. Proper ESD precautions include, but are not
limited to, working on an ESD mat and ensuring that the operator is properly
grounded.
To insert the MMC/SD:
1. Suspend the mobile computer.
2. Remove the two keypad screws and slide the keypad down and lift off (see
page 8-5).
3. Lift the MMC/SD retaining door.
4. Position the MMC/SD, with the contacts down, into the MMC/SD holder. The MMC/SD
corner notch fits into the holder only one way. Snap the retaining door closed.
MMC/SD
MMC/SD Retaining Door
Figure 8-3. Inserting the MMC/SD
8-7
Accessories
Figure
Figure 8-1 on