Driver's Seat; Throttle And Choke Cables, Lever Bearings - Husqvarna Rider ProFlex 18 Operator's Manual

LUBRICATION

8. Driver's seat

Tilt the seat back.
Lubricate the lengthways adjustment mechanism
with the oil can.
Lubricate the lengthways adjustment runners with
grease. Pull the seat back and forth and lubricate on
both sides.
8009-347
9. Throttle and choke cables,
lever bearings
Remove the right side cover on the lever housing
(2 screws) and open the engine cover. Lubricate the
cables' free ends with the oil can, even those by the
carburettor. Move the controls to the end points and
lubricate again.
Lubricate the joints, catches, and bearings for the
cutting unit's control levers with an oil can.
Replace the lever housing's side cover.
8009-349
8009-157
61
English-