Checking The Tyre Pressures; Checking The Battery Acid Level; Ignition System - Husqvarna Rider ProFlex 18 Operator's Manual

Hide thumbs Also See for Rider ProFlex 18:
Table of Contents

Advertisement

Checking the tyre pressures

The tyre pressure should be 60 kPa / 0.6 bar / 9 PSI on
all wheels.
In order to improve drive power, the pressure in the
rear tyres can be reduced to 40 kPa / 0.4 bar / 6 PSI.
Highest permitted pressure = 80 kPa / 0.8 bar / 12 PSI.
IMPORTANT INFORMATION
Different air pressure in the front tyres will
result in the blades mowing the grass at
different heights.

Checking the battery acid level

Check that the acid level in the battery lies between the
markings. When refilling, only distilled water may be
used to fill the cells.
WARNING!
What to do in case of contact with
battery acid
• Externally: Rinse thoroughly with
water.
• Internally: Drink large quantities of
water or milk. Contact a doctor as
soon as possible.
• Eyes: Rinse thoroughly with water.
Contact a doctor as soon as possible.
The battery emits explosive gases.
Sparks, flames, and cigarettes must not
be present in the vicinity of the battery.

Ignition system

The engine is equipped with an electronic ignition
system. Only the spark plugs require maintenance.
Recommended spark plug, see "Technical data" on
page 73.
IMPORTANT INFORMATION
The wrong spark plug type can damage the
engine.
MAINTENANCE
6016-109
6008-216
39
English-

Advertisement

Table of Contents
loading

Table of Contents