Safety Instructions; General Use - Husqvarna Rider ProFlex 18 Operator's Manual

Hide thumbs Also See for Rider ProFlex 18:
Table of Contents

Advertisement

Safety instructions

These instructions are for your safety. Read them
carefully.
WARNING!
The inserted symbol means that
important safety instructions needed
to be observed. It applies to your
safety.

General use

Read all instructions in this operator's manual and
on the machine before starting it. Ensure you
understand them and then observe them.
Learn how to use the machine and its controls
safely and learn how to stop quickly. Also learn
to recognize the safety decals.
Only allow the machine to be used by adults who
are familiar with its use.
Make sure nobody else is in the vicinity of the
machine when you start the engine, engage the
drive, or run the machine.
Clear the area of objects such as stones, toys, steel
wire, etc. that may become caught in the blades and
be thrown out.
Beware of the ejector and do not point it at any one.
Stop the engine and prevent it from starting before
you clean the cutting unit.
Remember that the driver is responsible for dangers
or accidents.
Never take passengers. The machine is only
intended to be used by one person.
Always look down and behind before and during
reversing manoeuvres. Keep watch for both large
and small obstacles.
Slow down before turning.
Shut down the blades when not mowing.
Be careful when rounding fixed objects, so that the
blades do not hit them. Never run the machine over
foreign objects.
WARNING!
This machine can sever hands and
feet as well as throw objects.
Failure to observe the safety
instructions can result in serious
injuries.
SAFETY INSTRUCTIONS
Read the operator's manual before starting the
machine
Clear the area of objects before mowing
Never take passengers
8010-047
6003-002
8010-052
7
English-

Advertisement

Table of Contents
loading

Table of Contents