Proper Service; Serial Number - Husqvarna Rider ProFlex 18 Operator's Manual

Proper Service

Husqvarna's products are sold all over the world and only by specialised retail traders offering complete
service. This ensures that you as a customer receive only the best support and service. Before the product
is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate
in the Service Journal in this operator's manual.
When you need spare parts or support concerning service, warranty issues, etc., please consult the
following professional:
This operator's manual belongs to the
machine bearing serial number:

Serial Number

The serial number can be found on the printed plate attached to the front, left-hand side under the seat.
Stated on the plate, from the top, are:
• The machine's type designation.
• The manufacturer's type number.
• The machine's serial number.
Please state the type designation and serial number when ordering spare parts.
The engine's serial number is found on a barcode sticker. This is placed on the left side of the crankcase,
in front of the starter. The sticker states:
• The engine's serial number (E/NO).
• Code.
Please state these when ordering spare parts.
The transmission's serial number is found on the barcode sticker located on the front of the housing on
the left-hand drive shaft:
• The type designation is stated above the barcode and starts with the letter K.
• The serial number is stated above the barcode and has the prefix s/n.
• The manufacturer's type number is stated under the barcode and has the prefix p/n.
Please state the type designation and serial number when ordering spare parts.
4
English-
INTRODUCTION
Engine Transmission