Loading A Document For Scanning; When Using Automatic Feed - Canon imageFORMULA DR-3060 Startup Manual

Loading a Document for Scanning

This scanner supports both automatic and manual feed operation. The
methods for loading the document to be scanned when using automatic feed
and manual feed are explained separately.
Notice
When loading a document for scanning, be careful to remove all paper clips,
staples, etc., from the document. During the scanning process, such objects
can tear the document, cause a paper jam, and damage the scanner.

When Using Automatic Feed

1.
Get ready to perform the scanning operation with your application software,
and set the automatic feed function.
2.
Straighten the edges of the document to be scanned.
CAUTION
Be careful when placing a document in the scanner. It is possible
to cut your hand on the edge of a sheet of paper.
3.
Align the paper side guides with the width of the document that is to be
scanned. If the document is printed on a standard size of paper, align the
guides with the appropriate document positioning mark.
32
Using the Scanner