Notes On Normal Handling - Canon imageFORMULA DR-3060 Startup Manual

Notes on Normal Handling

WARNING
To avoid fire and electric shock, always observe the following
warnings when using this unit.
Do not place flammable chemicals, such as alcohol or paint thinner, near
the unit.
Do not cut, damage, or modify the power cord. Do not place heavy objects
on the power cord, do not pull on the power cord, and do not bend the
power cord sharply.
Do not plug in or unplug the power cord with wet hands.
Do not multi-outlet adapters to connect multiple devices to one outlet.
Do not tie up or bundle the power cord. Push the plug in as far as it will go
when plugging in the power cord.
Only use the power cord that was provided with this unit.
Do not attempt to disassemble or modify this unit.
Do not use flammable sprays near this unit.
Always turn the unit off and unplug the power cord before cleaning this
unit.
To clean this unit, dampen a cloth in a mild detergent solution and then
wring the cloth out thoroughly. Do not use flammable liquids to clean the
unit, including alcohol, benzene, or paint thinner.
If the unit ever makes a strange noise, emits smoke or a strange odor, or
becomes hot, or if the unit does not operate at all even though the power is
on, immediately turn the unit off and unplug the power cord. Contact your
dealer or service representative to have the unit serviced.
Do not drop, kick, or otherwise strike the unit. If the unit does somehow
become damaged, immediately turn the unit off and unplug the power cord.
Contact your dealer or service representative to have the unit serviced.
Always turn the unit off and unplug the power cord before moving this
unit.
6
Before Using the Unit