Loading A Document - Canon ImageFormula R10 User Manual

Loading a document

1
Open the feed tray to turn ON the scanner.
2
Raise the document guides and feed extension plates.
3
Load the document.
• Before you load the document, thoroughly fan the pages.
• Straighten out the creases and folds at the ends of the
manuscript.
• Load the document into the feed inlet of the scanner with the
scanning side of the document face down and the top of the
document pointing down.
4
Align the document guides with both edges of the loaded document.
• Press the document beneath the tabs of the document guides.
• Up to 20 pages of plain paper can be loaded at the same time.
Make sure that the document does not exceed the loading limit
marks ( ) on the document guides.

When loading a multi-page document, place the pages of the
document with their edges slightly askew.

If the document is curved, straighten the document before loading it.

The scanned document is ejected from the front. Do not place any
objects in front of the scanner.
21