Alcatel-Lucent 8232 DECT Handset User Manual page 56

Phone description
Access MENU.

 Confirm.
 Navigate.
Short press: Access the company directory.

Long press: Identify the terminal you are on.

 In communication mode: Activate/deactivate the mute feature. No
feature is associated with this key in idle mode.
In idle mode
Short press: Access the ringer and vibrate adjustment feature.

 Long press: Activate/deactivate vibrate feature.
In communication mode: Activate/deactivate the loudspeaker.

 Long press (features depending on the system): Access to personal speed dial /
Access the DTMF feature during a conversation.
 GAP mode: when you are on a call, you can initiate a second call.
Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site http://www.al-enterprise.com/.
Copyright © ALE International 2016
Answer the call.

 Long press (feature depending on the system):
redial last number or access the redial list.
Switching between two calls (Broker call).

Switch off ringer.

 Hang up.
Long press: Switch on the phone / Switch off the

phone.
Return to previous menu.

 Erase a character.
Delete an entire field.

Short press: Back to homepage.

Long press: Lock/unlock keypad.

 Green steady: the phone is on the charger and the battery is fully
charged.
Red steady: the phone is on the charger and the battery is charging.

Slow orange flashing: telephonic event such as unread message,

LED missed call, etc.
 Rapid orange flashing: Iincoming call.
Red flashing: out of coverage.

Flashing when the phone is plugged into the charger means the same as

when the phone is not plugged into the charger.
Short press: Increase the volume of ring tone during an incoming call (4 steps) or

increase volume of loudspeaker during a conversation (8 steps).
 Long press in conversation: Activate/deactivate the loudspeaker.
 Short press: Decrease the volume of ring tone during an incoming call (4 steps) or
decrease volume of loudspeaker during a conversation (8 steps).
Long press: Activate/deactivate the mute feature.

 3.5 mm jack plug for headset and maintenance.
 Clip to hook your phone on your belt. You can remove the clip and instead use the
cover that is provided in the phone package.
USB plug for charging the battery.

 Press on this key to light up the screen when the phone is in idle state.
Charging your telephone battery ?
How to dock your phone on the desk support.
Put your phone on its support. Plug the USB cable into the 5V socket of the
desktop charger. Plug the other end of the USB cable into the AC/DC
adaptor. Plug the AC/DC adaptor into the mains power supply.
How to dock your phone with the USB cable
Plug the USB cable into the USB port of your phone. The other end of the USB cable can be
plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB plug.
However, the charging time is longer than charging with the AC/DC adapter.
LED
Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully
charged.
Red steady: the phone is on the charger and the battery is charging.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the
battery. If the telephone is to remain unused or out of its charger for several weeks, remove the
battery and store it separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the
USB plug from a device other than the AC/DC adapter.